6 tons/hour Steam and 5.000.000 kcal/h Thermal Oil Boiler for Bey-Dağ Tekstil

We produced two separate boilers for Bey-Dağ Tekstil in Kahramanmaraş: a header type steam boiler with a capacity of 6 tons/hour, 8 bar pressure rotary grate, water pipe , and a thermal oil boiler with a rotary grate with a thermal power of 5,000,000 kcal/h. Both boilers were designed to run on solid fuel and were delivered to the company.

Steam and high-temperature heat respond to different needs in textile facilities. Steam; While it is used in processes such as dyeing, washing, finishing and ironing, equipment that requires higher temperatures such as stenter (stretching-drying) machines, heat-setting and drying units are usually heated with thermal oil. The use of these two systems together provides heat at the appropriate temperature for each process.

In the thermal oil boiler, the thermal oil can be heated up to 300–320 °C at atmospheric pressure; since the high temperature is obtained without pressure raising, there is no corrosion and scale problem, and the maintenance cost is reduced. The rotary grate combustion system automatically feeds the coal and biomass in both boilers and discharges the ash; in the header type steam boiler, the worn pipes can be replaced one by one.

For the details of the products, you can review our rotary grate header type steam boiler and thermal oil boiler pages, and our references for our other projects in the textile sector. We would like to thank Bey-Dağ Tekstil.